LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section >> Preparing Connection Areas Of Body For Installing Longitudinal Member For Wheel Housing

Preparing Connection Areas Of Body For Installing Longitudinal Member For Wheel Housing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
  • The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
  • Do not begin bonding work until all materials and tools necessary for later repair work are available.
  1. Straighten sealing surface and connection areas of the body.
  2. De-burr connection areas and prepare for welding.
  3. Prepare marked areas for welding and bonding.
    G14269416Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connection areas

    G14269417Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connection areas

scientia non olet · About LEMON Manuals