LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 505619 Removing And Installing Front Wheel Housing Liner >> Removing And Installing Front Wheel Housing Liner >> Removing And Installing Front Wheel Housing Liner - Rear Part

Removing And Installing Front Wheel Housing Liner - Rear Part

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew nuts -2-  .
  2. Unscrew and remove screws -3-  .
  3. Remove front wheel housing liner - rear part
    G14269359Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing front wheel housing liner - rear part

  4. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for nut on front wheel housing liner - rear part: > Tightening torque 3 N.m (2 ft.lb) 

    Tightening torque for screw on front wheel housing liner - rear part: > Tightening torque 3 N.m (2 ft.lb) 

scientia non olet · About LEMON Manuals