LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 505355 Replacing Wing Joining Plate >> Preparing Front Wing Joining Plate For Installation

Preparing Front Wing Joining Plate For Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit wing joining plate and secure it to the body.
    1. 1.1  Drill bores for the rivets through the existing holes. > Diameter 6.5 mm 
  2. Remove wing joining plate.
  3. Countersink bores for installing countersunk rivets. > Nr.202 - Countersink 
  4. Prepare connection areas for bonding.
    G14269347Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing connection areas for bonding

scientia non olet · About LEMON Manuals