LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 501055 Replacing Front Closing Panel >> Removing Front Closing Panel

Removing Front Closing Panel

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Closing Panel Component Location
G14269178Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front closing panel

  1. Drill through clinch points using a drill bit with a diameter of > Diameter 6.5 mm  .
    G14269179Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing closing panel

  2. Drill through punch rivets using a > Nr.201 - twist drill  .
    G14269180Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing closing panel

  3. Remove closing panel.