LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 501055 Replacing Front Closing Panel >> Preparing Front Closing Panel For Installation

Preparing Front Closing Panel For Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit closing panel and secure it to the body.
    1. 1.1  Drill bores for the rivets through the existing holes. > Diameter 6.6 mm 
  2. Remove closing panel.
  3. Countersink bores for installing countersunk rivets. > Nr.202 - Countersink 
  4. Prepare connection areas for bonding.
    G14269181Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing closing panel for installation

scientia non olet · About LEMON Manuals