LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 - Bumpers) >> WM, 635719 Removing And Installing Rear Retaining Strip >> Installing Rear Retaining Strip

Installing Rear Retaining Strip

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit rear retaining strip -2-  and slide it up -A-  until the retaining strip is touching the side panel.
    G14271359Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing rear retaining strip

    1  Fastening screws
    2  Rear retaining strip
  2. Screw in and tighten fastening screws -2-  to > Tightening torque 7 N.m (5 ft.lb) + 0.7 N.m (0.4 ft.lb) -1 N.m (0.5 ft.lb)  .
scientia non olet · About LEMON Manuals