Removing Rear Apron
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Installation position of rear apron
- Disconnect wiring harness for ParkAssist -1-
.
Plug connection for ParkAssist
- 1.1 Unclip plug connection for ParkAssist.
- 1.2 Release and disconnect plug connection for ParkAssist.
- Disconnect wiring harness for reversing camera -1-
.
Plug connection for reversing camera
- 2.1 Unclip plug connection for reversing camera.
- 2.2 Release and disconnect plug connection for reversing camera.
- Unscrew fastening screws at the bottom -1-
.
Bottom fastening screws
- Unscrew lower fastening screws at the centre
Lower fastening screws at the centre
- Unscrew fastening screws in wheel housing
Fastening screws in wheel housing
- Unscrew fastening screws at the top -1-
and remove rear apron -arrow-
.
Fastening screws at the top