LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 - Bumpers) >> WM, 631719 Removing And Installing Retaining Strip For Front Apron >> Removing And Installing Retaining Strip For Front Apron >> Removing and installing front retaining strip for front apron

Removing and installing front retaining strip for front apron

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew nuts -2-  and remove front retaining strip for front apron -1-  .
    G14271340Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing front retaining strip

  2. Installation is performed in reverse order. Pay particular attention to the following:

    Centre front retaining strip for front apron at the screw-on points.

    Tightening torque for nut on front retaining strip for front apron: > Tightening torque 10 N.m (7.5 ft.lb) 

scientia non olet · About LEMON Manuals