LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 - Bumpers) >> WM, 631019 Removing And Installing Front Bumper >> Removing And Installing Front Bumper

Removing And Installing Front Bumper

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screws -2-  and remove front bumper -1-  .
    Fig 1: Front Bumper Component Location
    G14271311Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front bumper

  2. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw on front bumper: > Tightening torque 23 N.m (17 ft.lb) +/- 2 N.m (1.5 ft.lb) 

scientia non olet · About LEMON Manuals