Removing And Installing Switch Console

Information 

Switch off ignition and remove ignition key before disconnecting or connecting electrical loads.

1. Unclip switch console all the way around using a suitable tool -arrows-  and lift it up until the electric plug connection is accessible.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Information 

   The number of electric plug connections can vary, depending on equipment.

2. Release electric plug connection -arrow-  , disconnect it and remove switch console.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Information 

   The as-delivered condition of the switch console is modular. If it needs to be replaced, the basic console must be fitted with the operating buttons in accordance with vehicle equipment.

3. Installation is performed in reverse order.