Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Radiator module to body | Item 2 | Tightening torque | 8 Nm (6 ftlb.) | ||
|
Installation overview of radiator and electric fan |
|||||
| Lower trailing arm on rear axle housing | Final tightening/Screw/Nut/Item 9 and 10/Always replace threaded connection following removal. | Tightening torque | 160 Nm | ||
|
Trailing arm |
|||||
| Tie rod to rear axle steering/cross member | Screw/Nu t/Item 2 and 4/Always replace threaded connection following removal. Screw in zero position. | Tightening torque | 100 Nm (74 ftlb.) | ||
|
Tie rod |
|||||
| Tie-rod ball to tie rod | Nut/Item 3 | Tightening torque | 90 Nm (67 ftlb.) | ||
|
Tie-rod ball on tie rod |
|||||
| Front-axle carrier to body | Initial tightening/Screw/Item 2 to 4/Always replace screws following removal | Tightening torque | 70 Nm (52 ftlb.) | ||
|
Front axle |
|||||
| Front-axle carrier to bod | Final tightening/Screws/Item 2 to 4/Always replace screws following removal | Torque angle | + 180 ° | ||
|
Front axle |