Removing Servo Motor For Rear Axle Steering
- Release and disconnect electric plug connections -2 and 3-
.
Electric plug connections on servo motor for rear axle steering
- Remove servo motor for rear axle steering -1-
.
- 2.1 Mark the position of the eccentric threaded joints -2 to 4- .
- 2.2 Unscrew nut -2- and counter at the eccentric screw -3- .
- 2.3 Remove eccentric screw -3- and eccentric washer -4- .
- 2.4 Unscrew and remove screws -5 to 8- .
- 2.5 Remove servo motor for rear axle steering -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Servo motor for rear axle steering