Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Steering column to body | Nuts/Item 1 to 4/Observe tightening sequence 1 to 4! | Tightening torque | 20 Nm (15 ftlb.) | ||
|
Steering column |
|||||
| Steering shaft to steering column | Initial tightening/screw/Item 2/Always replace screw following removal. | Tightening torque | 20 Nm (15 ftlb.) | ||
|
Universal joint |
|||||
| Steering shaft to steering column | Final tightening/screw/Item 2/Always replace screw following removal. | Torque angle | + 90 ° | ||
|
Universal joint |
|||||