Technical Values

Location	Description	Type	Basic value
Compressor/valve unit holder to rear electric motor housing	Collar nut - Item 3	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Compressor with holder
Pressure accumulator holder to body	Collar nut - Item 5 and 6	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Pressure accumulator
Air line to pressure accumulator	Voss threaded joint - Item 2	Tightening torque	3.5 Nm (2.6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Pressure accumulator
Screws securing valve unit to holder	Screw - Item 3	Tightening torque	5 Nm (3.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Valve unit
Pressure accumulator line to valve unit	Voss threaded joint - Item 5	Tightening torque	3.5 Nm (2.6 ftlb.)
Air lines to valve unit and air spring	Voss threaded joint - Item 4	Tightening torque	2.3 Nm (1.7 ftlb.)
Air line to front air-spring strut	Voss threaded joint - Item 3	Tightening torque	3 Nm (2 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Air line on air-spring strut
Air line to rear air suspension bellows	Voss threaded joint - Item 3	Tightening torque	2 Nm (1.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Air line on air spring bellows
Front level sensor to upper trailing arm	(Screw) Item 4	Tightening torque	6 Nm (4.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Front level sensor
Front level sensor to body	(Nut) Item 5	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Front level sensor
Rear level sensor	(Screws) Item 3 and Item 4/Always replace screws following removal!	Initial tightening	3 Nm (2 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear level sensor
Rear level sensor	(Screws) Item 3 and Item 4/Always replace screws following removal!	Final tightening	45 °
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear level sensor
Screw securing electric line for PDCC to PDCC control unit	Screw/Item 2	Tightening torque	5.6 Nm (4 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Electric wiring harness for anti-roll bar
Screw securing front body sensor on wheel side to wheel bearing housing	Item 3	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Front body sensor on wheel side
Screw securing rear body sensor on wheel side to wheel bearing housing	Item 5	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear body sensor on wheel side
Screw securing front body sensor on body side to wheel bearing housing	Item 3	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Front body sensor on body side
Screw securing rear body sensor on body side to wheel bearing housing	Item 3	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear body sensor on body side