Subsequent Work
NOTE:
Lifting, setting the vehicle down or moving the vehicle when the air spring system is not filled
- Risk of damage to the air spring bellows
- Replace (front) air-spring strut or (rear) air spring bellows
.
→ Deactivate the levelling system before raising the vehicle.
→ Do not raise or set the vehicle down when the air spring system is empty.
→ Moving unpressurised air spring bellows will cause them to fail; replace components.
Information
Do not set the vehicle down on its wheels or move the vehicle when the air springs/air spring system is empty.
- Lower the vehicle.
- Only for vehicles with air suspension:
Adjust chassis level.
- 2.1 Establish operational readiness.
- 2.2
Adjust chassis level:
In the central display, select Settings → Vehicle settings → Additional chassis settings and deactivate Jack mode.
- 2.3 Alternatively, the chassis levelling system will switch on automatically while driving: > Speed greater than 7 km/h (4 mph)