LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Taycan Turbo >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 Seat Frames -- Y1A - TAYCAN (Y1A) >> WM, 724919 Removing And Installing Side Cushion >> Removing Side Cushion

Removing Side Cushion

WARNING: Improper handling of airbag units 
  • Triggering of airbag unit. 
  • System faults can occur. 

    → Remove ignition key or remote control (hand-held transmitter) and keep it outside of the transmission range.

    → External power supply must be de-energised.

    → Disconnect the battery and isolate the ground strap so that all contact with a ground carrier is avoided.

    → Wait 1 minute after disconnecting the battery.

    → Only pull off connector on the triggering unit after the waiting time has elapsed.

    → Keep space in front of the airbag unit free.

    → Replace damaged parts.

    → Always set airbag units down with the blow-out opening facing upwards.

    → Do not place any objects on the airbag units.

    → Store airbag units in a safe place.

    → Avoid contact with grease, oil, detergents, liquids or similar substances.

    → Store airbag units in a cool place. Maximum temperature: 90 °C.

  1. Unscrew screw -1-  and pull side cushion up -Arrow-  and out.
    G15565127Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw

  2. Release and disconnect electric plug connection -1-  and unclip line -2-  .
    G15565128Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection

  3. Remove side cushion.