Repairing Antenna Cable (Sdars Antenna (Tailgate))

Disconnect antenna cable -1- in the SDARS antenna -2- area.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Antenna cable in SDARS antenna area
1. 1.1 Release electric plug connection for SDARS antenna -3- and disconnect it.
2. 1.2 Remove tie-wrap -4- .
3. 1.3 Expose damaged area of the antenna cable -1- from the electric wire harness.
Repair antenna cable.
> 912841 REPAIRING ANTENNA CABLE
Installation is performed in reverse order. Pay particular attention to the following:
1. 3.1 Connect electric plug connection until it locks perceptibly.
2. 3.2 Secure antenna cable with a new tie-wrap.