Repairing Antenna Cable In The Front Left Bumper Connection Point Area
- Detach antenna cable -1-
in the bumper connection point area.
If the antenna cable is damaged in an inaccessible area, the area can be replaced with a self-made adapter cable using the special tool.
Antenna cable at bumper connection point
- 1.1 Unlock holder -2- and open it in -Arrow direction- .
- 1.2 Unlock and pull off electric plug connection -3- .
- 1.3 Unclip clip -4- using a plastic spatula.
- 1.4 Unclip omega clip -5- .
- 1.5 Expose damaged area of antenna cable -1- in the electrical wire harness.
- Repair antenna cable.
- Installation is performed in reverse order. Pay particular attention to the following:
- 3.1 Push on electric plug connection until plug locks perceptibly.