Preliminary Work
- Observe warning notes for working on the high-voltage vehicle electrical system.
> General warning notes for working on the high-voltage vehicle electrical system
- Isolate the high-voltage system from the power supply.
> WM, 2X00IN ISOLATION FROM POWER SUPPLY PRIOR TO PERFORMING MAINTENANCE TASKS ON BEV VEHICLES
- Drain refrigerant.
- Drain coolant.
- Remove carrier plate for high-voltage distributor.
> 279819 REMOVING AND INSTALLING CARRIER PLATE FOR HIGH-VOLTAGE DISTRIBUTOR
- Remove refrigerant line between compressor and evaporator (section from shut-off valve 5 to internal heat exchanger).