Removing Servo Motor For Rear Right Air Flow
NOTE:
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
→ Switch off electrical loads before disconnecting or removing them.
- Remove servo motor for rear right air flow -1-
.
- 1.1 Release and disconnect electric plug connection -2- .
- 1.2 Unscrew and remove screws -3- .
- 1.3 Pull servo motor for rear right air flow -1- off the guide lugs -4- and remove it.
Servo motor for rear right air flow