Installing Servo Motor For Front Left Temperature Mixing Flap

1. Install servo motor for front left temperature mixing flap -1-  .
   1. 1.1 Position servo motor for front left temperature mixing flap -1-  .
   2. 1.2 Screw in and tighten screws -3-  .

      > Tightening torque 1.5 Nm (1 ftlb.) 

   3. 1.3 Connect and lock electric plug connection -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Servo motor for front left temperature mixing flap

2. Install air conditioning control unit holder -1-  .
   1. 2.1 Position air conditioning control unit holder -1-  .
   2. 2.2 Screw in and tighten screws -2-  .

      > Tightening torque 1.5 Nm (1 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air conditioning control unit holder