Removing Servo Motor For Defroster Flap

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

→ Switch off electrical loads before disconnecting or removing them.

Information

The pictures shown in this document may differ from the original.

Remove servo motor for defroster flap -1- .
1. 1.1 Release and disconnect electric plug connection -2- .
2. 1.2 Unscrew and remove screws -3- .
3. 1.3 Remove servo motor for defroster flap -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Defrost flap servo motor