Installing Servo Motor For Defroster Flap

Information 

The pictures shown in this document may differ from the original.

1. Install servo motor for defroster flap -1-  .
   1. 1.1 Position servo motor for defroster flap -1-  .
   2. 1.2 Screw in and tighten screws -3-  .

      > Tightening torque 1.5 Nm (1 ftlb.) 

   3. 1.3 Connect and lock electric plug connection -2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Defrost flap servo motor