LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Taycan Turbo S >> Repair and Diagnosis >> Electrical >> Body Electrical >> 97 Lines -- Y1A - TAYCAN (Y1A) >> WM, 973219 Removing And Installing Wire Harness For Rear Door (BODYSHELL) >> Removing Wire Harness For Rear Door (BODYSHELL)

Removing Wire Harness For Rear Door (BODYSHELL)

  1. Remove cover on power windows mechanism -4-  .
    1. 1.1  Release and unplug electric plug connections -1-  .
    2. 1.2  Loosen clip -2-  from cover on power windows mechanism -4-  .
    3. 1.3  Press grommet -3-  through cover on power windows mechanism -4-  .
    4. 1.4  Remove cover on power windows mechanism -4-  .
      G15567012Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Cover for power windows mechanism

  2. Release and unplug electric plug connections -1-  .
    G15567013Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connections

  3. Release and disconnect electric plug connection -2-  and push sleeve -1-  into the bodyshell using a plastic wedge.
    G15567014Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Sleeve

  4. Remove wire harness for rear door (bodyshell) -4-  .
    1. 4.1  Unclip clips -2-  .
    2. 4.2  Prise off sleeve -3-  .
    3. 4.3  Release and unplug electric plug connections -1-  .
    4. 4.4  Push wire harness for rear door (bodyshell) -4-  into the bodyshell and remove it.
      G15567015Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Wire harness for rear door (bodyshell)

scientia non olet · About LEMON Manuals