Installing Right Charging Socket
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten nut on shield connection to > Tightening torque 8 Nm (6 ftlb.) .
Tighten nuts on right charging socket to > Tightening torque 8 Nm (6 ftlb.) .
Tighten right fastening screw securing charging socket to the wing to > Tightening torque 4.5 Nm (3.25 ftlb.) .
Tighten screws for wing trim panel to wing to > Tightening torque 2.8 Nm (2 ftlb.) .
Electric plug connections must engage securely.