Subsequent Work

Perform potential equalization measurement.
> 2X00IN PERFORMING POTENTIAL EQUALIZATION MEASUREMENT (FOUR-WIRE MEASUREMENT)
Perform leak test on high-voltage battery housing and record the results.
> 270803 PERFORMING LEAK TESTS ON THE HIGH-VOLTAGE BATTERY
Fit high-voltage line for E-box to electric motor at the rear and tighten to > Tightening torque 8 Nm (5.9 ftlb.) .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

High-voltage line from E-box to electric motor at rear
Install high-voltage battery.
> 270819 REMOVING AND INSTALLING HIGH-VOLTAGE BATTERY - on "Installing"
Start the high-voltage system and complete the log.
> Refer to 2X00IN Isolating high-voltage system from power supply/Starting high-voltage system in the appropriate service information.