LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Taycan Base >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> 27 Starter, Power Supply, Cruise Control 2.0L (1 Of 2) -- Y1A - TAYCAN (Y1A) >> WM, 270619 Removing And Installing Vehicle Electrical System Battery >> Subsequent Work

Subsequent Work

  1. Install air inlet housing section -1-  .
    1. 1.1  Position air inlet housing section -1-  .
    2. 1.2  Clip in clips -3-  .
    3. 1.3  Clip in holder -2-  .
      G15550623Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Air inlet housing section

  2. Install cowl panel cover.

    > 508719 REMOVING AND INSTALLING COWL PANEL COVER - section on "Installing"

  3. Insert fuse F12 into the fuse box in the front end.
    1. 3.1  Fit fuse F12 on fuse box in the front end.

      The fuse assignment is stored in the fuse box and must be checked.

      G15550624Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      F12 fuse

    2. 3.2  Close cover on fuse box in the front end.
      G15550625Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Fuse box in front end

  4. Start the high-voltage system and complete the relevant documentation.

    > 2X00IN ACTIVATING/STARTING HIGH-VOLTAGE SYSTEM

  5. Carry out the work instructions after disconnecting the battery.

    > 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING BATTERY