Removing Right Charging Socket

Information 

The number of electric plug connections and clips will vary depending on equipment.

1. Remove wing trim panel -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Wing trim panel

   1. 1.1  Unclip pull knob -1-  (-Arrow-  ).
   2. 1.2  Unscrew screws -3-  .
   3. 1.3  Remove wing trim panel -2-  and feed out pull knob -1-  .
2. Unscrew screw -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Screw

3. Release and disconnect electric plug connection for high-voltage line for right charging socket -1-  at the high-voltage charger and unclip clip -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric plug connection

4. Release and disconnect electric plug connections -1-  at the high-voltage distributor and unclip clips -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric plug connections

5. Disconnect electric lines.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Clips

   1. 5.1  Unscrew nut -1-  and loosen electric lines -4-  .
   2. 5.2  Unclip clips -2-  and loosen electric lines -5-  .
   3. 5.3  Release and disconnect electric plug connection -3-  on right charging socket.
6. Feed electric lines -1-  through the opening in the bodyshell -Arrow-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric lines

7. Unscrew nuts on right charging socket -2-  and remove right charging socket -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Right charging socket