Installing Supports For Level 2

Use a new hose clamp and push the supports into the coolant hose as far as the marking.
Clamp hose clamp using > V.A.G 1682A - clamp tensioner .
Position supports for level 2 and press it onto the quick connector on the coolant line until the coolant line lock engages securely.
Visually inspect the joint.
Check joint to ensure that it is connected correctly.
Position supports for level 2 on the high-voltage battery and secure it by tightening the four fastening screws > Tightening torque 8 Nm (6 ftlb.) .