Fastening Main Wire Harness In Luggage Compartment (Rear)
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten nuts on ground points at right C-pillar with > Tightening torque 8.5 Nm (6.25 ftlb.) .
Tighten nuts on ground points at left C-pillar with > Tightening torque 8.5 Nm (6.25 ftlb.) .
Tighten screws on cable duct with > Tightening torque 13.5 Nm (10 ftlb.) .
Electric plug connections must engage securely.