LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Taycan Base >> Repair and Diagnosis >> Electrical >> Gauges >> 97 Lines -- Y1A - TAYCAN (Y1A) >> WM, 972719 Removing And Installing Wire Harness For Rear Lid >> Installing Wire Harness For Rear Lid

Installing Wire Harness For Rear Lid

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Electric plug connections must engage securely.



  1. Installation is performed in reverse order.

    Electric plug connections must engage securely.

    Secure ground line to the body by tightening it to > Tightening torque 8.5 Nm (6.3 ftlb.)  .

    Tighten screws on C-pillar cover to > Tightening torque 4.5 Nm (3.25 ftlb.) 

scientia non olet · About LEMON Manuals