LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Taycan Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 40 Wheel Suspension Front Drive Shaft 2.0L -- Y1A - TAYCAN (Y1A) >> WM, 407719 Removing And Installing Front Anti-Roll Bar >> Installing Front Anti-Roll Bar

Installing Front Anti-Roll Bar

  1. Install front anti-roll bar -1-  .
    1. 1.1  Position front anti-roll bar -1-  .
    2. 1.2  Position anti-roll bar clamps -3-  .
    3. 1.3  Screw in and tighten new  screws -2-  .

      > Tightening torque 50 Nm (37 ftlb.) 

      > Torque angle + 30 ° 

      G15552632Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Anti-roll bar

scientia non olet · About LEMON Manuals