Subsequent Work
- Secure brake caliper rear.
- Bed in service brake.
- 2.1 Connect PIWIS Tester to the vehicle and switch it on.
- 2.2 Switch on ignition.
- 2.3 Start diagnostics.
- 2.4 Select "Brake electronics" control unit.
- 2.5 Select Maintenance/repairs tab.
- 2.6 Select the menu item "Bed in service brake" and press F12 to continue.
- 2.7 Follow the instructions on the Tester.
- For vehicles from model year 2021 with Connect release 3.x:
- 3.1 Reset Smart Service values using the PIWIS Tester.