Installing (Side) Luggage Compartment Trim Panel (Luggage Compartment Cover)
- Installation is performed in reverse order. Pay particular attention to the following torque: > Tightening torque 20 Nm (15 ftlb.)
- Installation is performed in reverse order. Pay particular attention to the following:
- Place the sealing lip of the tailgate over the trunk cover (side).
- Tighten screws on luggage compartment trim panel (side luggage compartment cover). > Tightening torque 2 Nm (1.5 ftlb.)
- Tighten screws for the lashing points. > Tightening torque 20 Nm (15 ftlb.)