Installing Steering Wheel
Information
Steering wheel marking
- The wheels must be in straight-ahead position .
- The marking on the steering wheel and steering column -1- must be aligned .
- Install steering wheel -1-
.
- 1.1 Position steering wheel -1- .
- 1.2 Fit and tighten new screw -4-
.
> Tightening torque 30 Nm (22 ftlb.)
> Torque angle + 90 °
- 1.3 Connect and lock electric plug connection -2- .
- 1.4 Only for vehicles with heated steering wheel:
Connect and lock electric plug connection -3- .
Steering wheel