Installing Rear Centre Air Jet

1. Install rear centre air vent -1-  .
   1. 1.1 Position rear centre air vent -1-  and clip it into the retaining clips -5-  .
   2. 1.2 Screw in and tighten screws -4-  .

      > Tightening torque 1.8 Nm (1.3 ftlb.) 

   3. 1.3 Clip in clips -3-  .
   4. 1.4 Push on and lock electric plug connection for servo motors -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rear centre air vent

2. Install glass trim -1-  .
   1. 2.1 Position glass trim -1-  and clip in clips -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Glass trim

3. Install outlet vent trim -1-  .
   1. 3.1 Position outlet vent trim -1-  and clip in clips -2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outlet vent trim