Installing Air Inlet Housing

1. 1.1 Position air inlet housing -1-  .
2. 1.2 Screw on and tighten nuts -4-  .

   > Tightening torque 8 Nm (6 ftlb.) 

3. 1.3 Push on and lock electric plug connection -2-  on air quality sensor -3-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air inlet housing

1. 2.1 Position water deflector -1-  at the retaining lug -4-  and guide rib -5-  and clip it into the catch -3-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Water deflector