Power-Steering Gear
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Power-steering gear to front-axle carrier | Initial tightening/Screws/Item 4/Always replace screws following removal. | Tightening torque | 70 Nm (52 ftlb.) | |
|
Power-steering gear |
||||
| Power-steering gear to front-axle carrier | Final tightening/Screws/Item 4/Always replace screws following removal. | Torque angle | + 180 ° | |
|
Power-steering gear |
||||
| Power-steering gear to front-axle carrier at the sides | Initial tightening/Screw/Nut/Item 2 and 3/Always replace threaded connection following removal. | Tightening torque | 20 Nm (15 ftlb.) | |
|
Power-steering gear |
||||
| Power-steering gear to front-axle carrier at the sides | Final tightening/Screw/Nut/Item 2 and 3/Always replace threaded connection following removal. | Torque angle | + 180 ° | |
|
Power-steering gear |
||||
| Steering shaft to power-steering gear | Initial tightening/Screw/Item 2/Always replace screw following removal. | Tightening torque | 20 Nm (15 ftlb.) | |
|
Universal joint for steering column |
||||
| Steering shaft to power-steering gear | Final tightening/Screw/Item 2/Always replace screw following removal. | Torque angle | 90 ° | |
|
Universal joint for steering column |
||||
| Tie-rod ball to tie rod | Nut/Item 3 | Tightening torque | 90 Nm (67 ftlb.) | |
|
Tie-rod ball on tie rod |
||||