LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Taycan 4S >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 Seat Frames -- Y1A - TAYCAN (Y1A) >> WM, 726319 Removing And Installing Locking Mechanism For Rear Backrest >> Installing Locking Mechanism For Rear Backrest

Installing Locking Mechanism For Rear Backrest

Information 

Direct threaded joint in plastic. Use screw-in speed of less than 500 rpm.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws to > Tightening torque 3.2 Nm (2.1 ftlb.)  .

scientia non olet · About LEMON Manuals