Repairing Antenna Cable In The Front Bumper Connection Point Area
- Detach antenna cable -1-
in front bumper connection point -2-
area.
Antenna cable in the front bumper connection point area
- 1.1 Unlock and open holder -3- .
- 1.2 Unlock and pull off electric plug connections to front bumper connection point -4- and unclip them from front bumper connection point -2- .
- 1.3 Unclip clip -5- using a plastic spatula.
- 1.4 Expose damaged area of antenna cable -1- in the electrical wire harness.
- Repair antenna cable.
- Installation is performed in reverse order. Pay particular attention to the following:
- 3.1 Push on electric plug connections until plugs lock perceptibly.