| Steering column to retaining frame |
Hexagon nut, M8 |
Tightening torque |
20 Nm (15 ftlb.) |
|
| Steering wheel to steering column |
Internal serration screw, M18 x 1.5 x 26, always replace following removal! (microencapsulated thread) |
Initial tightening |
30 Nm (22 ftlb.) |
|
| Steering wheel to steering column |
Internal serration screw, M18 x 1.5 x 26, always replace following removal! (Microencapsulated thread) |
Final tightening torque angle |
+ 90° |
|
| Steering column to steering column centre (universal joint) |
Hexagon round-head bolt, M8 x 30/always replace bolt following removal! |
Initial tightening |
20 Nm (15 ftlb.) |
|
| Steering column to steering column centre (universal joint) |
Hexagon round-head bolt, M8 x 30/always replace bolt following removal! |
Final tightening torque angle |
+ 90° |
|
| Steering column centre to power-steering gear (universal joint) |
Hexagon round-head bolt, M8 x 30/always replace bolt following removal! |
Initial tightening |
20 Nm (15 ftlb.) |
|
| Steering column centre to power-steering gear (universal joint) |
Hexagon round-head bolt, M8 x 30/always replace bolt following removal! |
Final tightening torque angle |
+ 90° |
|
| Control unit for steering column adjustment to steering column |
Rounded hexagon socket head bolt, M5 x 8 |
Tightening torque |
1.5 Nm (1 ftlb.) |
|
| Control unit for steering column lock to steering column |
Rounded hexagon socket head bolt, M5x 14 |
Tightening torque |
3.6 Nm (2.5 ftlb.) |
|
| Contact bridge to steering wheel skeleton |
|
Tightening torque |
6 Nm (4.5 ftlb.) |
|
| Multi-functional switch and front trim to main cover |
|
Tightening torque |
0.45 Nm (0.25 ftlb.) |
|
| Steering wheel skeleton to main cover |
|
Tightening torque |
2 Nm (1.5 ftlb.) |
|
| Paddles to steering wheel skeleton |
|
Tightening torque |
2.5 Nm (2 ftlb.) |
|
| Rear cover to steering wheel skeleton |
|
Tightening torque |
2.7 Nm (2 ftlb.) |
|