Installing Steering Wheel

Information 

• Turn wheels to straight-ahead position and observe the marking you applied earlier! 
• Airbag unit must lock with an audible click! Pull to check that the airbag unit is fitted securely! 
• Always replace screw! 

1. Installation is performed in reverse order. Pay particular attention to the following:
   1. 1.1 Install steering wheel in accordance with the marking -2-  applied between the steering wheel and steering column.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Fitting according to applied marking

   2. 1.2 Screw in and tighten new screw -1-  .

      > Initial tightening 30 Nm (22 ftlb.) 

      > Final tightening torque angle + 90° 

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Screwing in screw

   3. 1.3 Check airbag unit before installation: 
      • Check correct positioning of the compression spring -1-  (seating of the compression spring -1-  in spring guide!).
      • Slide securing clip -2-  up evenly, let it go and check that the securing clip -2-  moves down evenly.

        Courtesy of PORSCHE CARS NORTH AMERICA, INC.

        Checking that steering wheel is secure