Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Remove front wheel housing liner at the right (rear section).
> WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER
- Remove left side section of cover for centre underbody.
> WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY
- Loosen three nuts -2-
on the front underbody cover in the right strut area.
Removing cover for front underbody
- Unscrew screws -2- and remove strut -1- .
Removing strut