Subsequent Work

1. 1.1 Move torque support bracket -1-  into installation position and fit screws -2-  and -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Torque support bracket

2. 1.2 Tighten screw -2-  > Tightening torque 23 Nm (17 ftlb.) 
3. 1.3 Tighten screw -3-  > Tightening torque 55 Nm (40.6 ftlb.) 

> 103719 REMOVING AND INSTALLING TORQUE SUPPORT

> 108319 REMOVING AND INSTALLING ENGINE COVER

> WM, 408619 REMOVING AND INSTALLING STRUT (A-STRUT)