Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw-type clamp for pressure hose | Tightening torque | 5.5 Nm (4 ftlb.) | +/- 0.5 (0.3 Mb.) Nm | ||
| Screw-type clamp for pressure hose | Tightening torque | 5.5 Nm (4 ftlb.) | +/- 0.5 Nm (0.3 ftlb.) | ||
| Fastening screws securing pressure pipe to throttle valve | M6 x 18 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Fastening screw securing throttle valve to intake-air distributor | TP6 x 45 | Tightening torque | 7 (5 Mb.) Nm |