Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Heat shield | on final drive | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Oil inspection plug | on final drive | Tightening torque | 35 Nm | ||
| Oil level | under lower edge of filler screw | Fill quantity | 6 mm | +/- 2 mm | |
| Oil level | under lower edge of filler screw | Fill quantity | 6 mm | +/- 2 mm |