Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Control rod adjustment range | with 170 - 230 mbar vacuum | Setpoint value | 8 mm | +/- 1 mm | |
| Control rod adjustment range | with 100 - 170 mbar vacuum | Setpoint value | 3 mm | +/- 1 mm | |
| Nut for vacuum unit | M6 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Lock nut for control rod | Tightening torque | 8 Nm (6 ftlb.) |