Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Bracket securing torque support upper part to lower part | Tightening torque | 55 Nm (40.6 ftlb.) | |||
| Fastening screw for torque support bracket | M8 x 55/(V6 Turbo M8 x 45) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screw for fuel line support | M6 x 12 | Tightening torque | 9 Nm (6.6 ftlb.) | ||
| Union nut for fuel line | Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. | tightening torque of | 10 Nm (7.4 ftlb.) | ||
| Union nut for fuel line | Coat thread on union nut with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. | Torque angle | 60° |