Removing Fuel Line (High-Pressure, Left)
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Hot fuel and hot fuel lines.
- Danger of scalding
→ Allow the fuel to cool down before opening line connections.
→ Wear protective gloves.
→ Wear protective goggles.
Information
The rules relating to cleanliness and instructions for working on the fuel system must always be observed before and during the work.
> WM, 2X00IN RULES RELATING TO CLEANLINESS AND INSTRUCTIONS FOR WORKING ON THE FUEL SYSTEM
> WM, 2X00IN BASIC SAFETY INSTRUCTIONS FOR WORKING WITH THE FUEL SYSTEM
Information
Check fuel line for damage following removal and replace it if necessary.
- Undo screws -1 and 2-
and remove coolant pipe -3-
.
Coolant pipe on left cylinder bank
- Disconnect additional coolant pump coolant pipe -1- .
- Release and disconnect line connection -1-
and move brake booster vacuum line -2-
aside.
Moving brake booster vacuum line aside
- Press sound absorber aside and unscrew union nut -1-
on the left rail using > T40055 - socket-wrench insert
.
Unscrewing union nut on left rail
- Unscrew union nut -1-
on high-pressure fuel line at the right using > T40055 - socket-wrench insert
.
Unscrewing union nut on high-pressure fuel line at the right
Information
- Open connections and lines must be closed off using suitable stoppers or caps.
- Unscrew screws -1-
and guide out fuel line with holders -2-
.
Removing fuel line