Removing Intake-Air Distributor (V6 Turbo): Notes

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

V6 biturbo only:
Press release buttons -1- on both sides of the vacuum hose connection pieces and pull off vacuum hoses -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vacuum hoses (V6 biturbo)
V6 biturbo only:
Release and disconnect electric plug connections -1- on intake-air distributor -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connections on intake-air distributor
Unclip line bracket -1- from intake-air distributor.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Line bracket on intake-air distributor
Remove intake-air distributor -1- .
1. 4.1 Unscrew screws -2 to 11- .
2. 4.2 Remove intake-air distributor -1- .
3. 4.3 Check seal and replace it if necessary.

Fig 1: Intake-Air Distributor Screws Loosening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intake-air distributor